NetBSD 2.0 (GENERIC) #0: Wed Dec 1 10:58:25 UTC 2004 builds@build:/big/builds/ab/netbsd-2-0-RELEASE/i386/200411300000Z-obj/big/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/i386/compile/GENERIC total memory = 255 MB avail memory = 242 MB BIOS32 rev. 0 found at 0xffe90 mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: Intel Celeron (Mendocino) (686-class), 398.07 MHz, id 0x660 cpu0: features 183f9ff cpu0: features 183f9ff cpu0: features 183f9ff cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way cpu0: L2 cache 128 KB 32B/line 4-way cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way cpu0: 8 page colors pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03) agp0 at pchb0: aperture at 0xf0000000, size 0x4000000 ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 0 function 0: ATI Technologies 3D Rage IIC (AGP) (rev. 0x3a) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 pcib0 at pci0 dev 7 function 0 pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02) piixide0 at pci0 dev 7 function 1 piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at irq 14 atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel interrupting at irq 15 atabus1 at piixide0 channel 1 uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01) uhci0: interrupting at irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured Aureal Semiconductor AU8820 Vortex Digital Audio Processor (audio multimedia, revision 0x02) at pci0 dev 13 function 0 not configured ex0 at pci0 dev 14 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30) ex0: interrupting at irq 9 ex0: MAC address 00:10:5a:e5:c4:a2 exphy0 at ex0 phy 24: 3Com internal media interface exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ppb1 at pci0 dev 15 function 0: Digital Equipment DECchip 21152 PCI-PCI Bridge (rev. 0x03) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok ahc1 at pci2 dev 9 function 0: Adaptec 2902/04/10/15/20/30C SCSI adapter ahc1: interrupting at irq 5 ahc1: aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs scsibus0 at ahc1: 8 targets, 8 luns per target isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: no ISA Plug 'n Play devices found fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec Kernelized RAIDframe activated scsibus0: waiting 2 seconds for devices to settle... atapibus0 at atabus0: 2 targets sd0 at atapibus0 drive 1: disk removable sd0: drive offline sd0: 32-bit data port wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 4110 MB, 14848 cyl, 9 head, 63 sec, 512 bytes/sect x 8418816 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers) sd0(piixide0:0:1): using PIO mode 3 atapibus1 at atabus1: 2 targets cd0 at atapibus1 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2 cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers) sd0(piixide0:0:1): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0(piixide0:0:1): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present sd0(piixide0:0:1): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) cd0(piixide0:1:0): Check Condition on CDB: 0x00 00 00 00 00 00 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present