Linux version 2.4.26-gentoo-r13 (root@Hades) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #2 Sat Jan 8 21:03:30 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e7400 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000040fdc00 (usable) BIOS-e820: 00000000040fdc00 - 00000000040ff800 (ACPI data) BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI NVS) BIOS-e820: 00000000040ffc00 - 000000000c000000 (usable) BIOS-e820: 00000000fffe7400 - 0000000100000000 (reserved) 192MB LOWMEM available. On node 0 totalpages: 49152 zone(0): 4096 pages. zone(1): 45056 pages. zone(2): 0 pages. Kernel command line: root=/dev/hda2 Initializing CPU#0 Detected 266.618 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 532.48 BogoMIPS Memory: 190604k/196608k available (2494k kernel code, 5604k reserved, 319k data, 112k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0080f9ff 00000000 00000000 00000000 CPU: Common caps: 0080f9ff 00000000 00000000 00000000 CPU: Intel Pentium II (Klamath) stepping 04 Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfd9c4, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0 Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with no debug enabled SGI XFS Quota Management subsystem Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled keyboard: Timeout - AT keyboard not present?(ed) keyboard: Timeout - AT keyboard not present?(f4) floppy0: no floppy controllers found Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 150M agpgart: Detected Intel 440LX chipset agpgart: AGP aperture is 64M @ 0xf8000000 [drm] Initialized tdfx 1.0.0 20010216 on minor 0 [drm] AGP 0.99 Aperture @ 0xf8000000 64MB [drm] Initialized radeon 1.7.0 20020828 on minor 1 [drm] AGP 0.99 Aperture @ 0xf8000000 64MB [drm] Initialized i810 1.2.1 20020211 on minor 2 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1060-0x1067, BIOS settings: hda:DMA, hdb:pio hda: IBM-IC35L090AVV207-0, ATA DISK drive blk: queue c0175f00, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: attached ide-disk driver. hda: host protected area => 1 hda: 160836480 sectors (82348 MB) w/1821KiB Cache, CHS=10011/255/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] usb.c: registered new driver hub host/uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Found IRQ 9 for device 00:07.2 PCI: Sharing IRQ 9 with 00:10.0 host/uhci.c: USB UHCI at I/O 0x1040, IRQ 9 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ds: no socket drivers loaded! EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 112k freed hub.c: new USB device 00:07.2-2, assigned address 2 hiddev0: USB HID v1.10 Device [APC Back-UPS ES 350 FW:800.e5.D USB FW:e5] on usb1:2.0 Adding Swap: 369484k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal PCI: Found IRQ 10 for device 00:0f.0 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:0f.0: 3Com PCI 3c905 Boomerang 100baseTx at 0x1000. Vers LK1.1.18-ac 00:60:97:83:89:2b, IRQ 10 product code 4848 rev 00.0 date 01-30-97 Internal config register is 16302d8, transceivers 0xe040. 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface. MII transceiver found at address 24, status 786f. Enabling bus-master transmits and whole-frame receives. 00:0f.0: scatter/gather enabled. h/w checksums disabled eth0: Dropping NETIF_F_SG since no checksum feature.